Home :: Contact :: Others ::Hot Rolled

UK agents for Lavorazione Italiana Metalli Affini and Rizzato Nastri Acciaio s.p.a

Products

Applications

Pressings, fine blanking, deep drawing, roll forming and fabricating, automotive components, domestic appliances, electrical hardware, computers and communications.

The manufacture of cold rolled strip requires the achievement of the highest quality standards. Our purpose built cold rolling mills gives us the capacity to maintain thickness tolerances closer than British Standard. We specialise in the supply of Cold Rolled Mild Steel, Cold Rolled Carbon Steel, Hot Rolled Mild Steel and Cold Reduced in slit coil and de-coiled lengths.

Grades

Spring Steels

CS60, SAE 1055	CS70,CK67,SAE 1070	CS50. CK45, SAE1050
CS80, SAE 1084, CK85	CS100, SAE 1095,CK101	51CrV4

Drawing Qualities

CS1,CS4,DC04/DC03	FeP04, FeP03, FeP01

Strip Mill Grades

CR1, CR2, CR4	Also available as Zintec or Galvanised

Size Range

Thickness	0.05mm to 7.00mm	0.002" to 0.27"
Width	6mm to 500mm	¼" to 20"


Surface Finishes	Bright or Matt

Tempers	Soft, Half Hard, Quarter Hard or Full Hard

Quarter Hard material can be bent (perpendicular to the direction of rolling) on itself without fracturing. Half hard material can be bent 90º; full hard can be bent 45º. Thus, these materials can be used for in applications involving great amounts of bending and deformation, without fracturing.

We also supply Hot Rolled Steel Strip

Deep drawing qualities
High strength low alloy
Medium and High carbon heat treatable

Home :: Contact ::